Multi-function intelligent angle control counting power supply

Angle control

● The significance of angle control is that it can be controlled and detected by the angle of rotation of the electric batch.

● Specific tightening, and can accurately and effectively determine the floating lock, sliding teeth, and screw problems.

● The accuracy of the angle control can also reach 0.1 circle (36 degrees);

● minimum angle (float lock monitoring);

● The minimum angle required when tightening a screw;

● When the lock is stopped and the minimum angle is not reached, the system will automatically unlock it;

● Maximum angle (sliding tooth monitoring);

● The maximum angle required when tightening a screw;

● When the lock reaches the maximum angle and is still not tightened, the system will stop rotating to protect the work and alarm output;

speed control

● In addition to the angle control, this product provides very powerful speed control. Can be arbitrarily set from 1500-2000 (rmp.min) speed (highest and lowest speed, depending on the matching electric batch);

● Under the speed control, even at the lowest speed, the torque can be reached by the torque set by the torque cup. And the popular electric batch on the market.

● Most of the motors will be blocked at low speeds, and the clutch will not jump, resulting in poor tightening;

● Unique patented technology, using the relationship between angle and speed and motor, through the high-speed real-time sampling of industrial microcomputer, it can identify the screw seat very quickly and effectively, and can reduce the torque shock to within the range under the condition of ensuring the force.

Variable speed control

Variable speed control means that the whole tightening process can be divided into surface sections, and the tightening speed of the two sections is different (customized models can be divided into multi-stage speed control). The significance of this function is that the quality can be tightened at the highest efficiency. For example, if the locked product is glass or other fragile products, if it is tightened at a higher speed, the torque shock caused by the high speed will easily damage the locked product, but if it is lower, When the speed is tightened, the efficiency will become very low. At this time, the shift control can be easily solved. Only the tightening speed of the front section is required to be set to a higher speed, but only the last few turns of the teeth, the speed is changed to a low speed, so that the quality of the locking can be ensured, and the tightening efficiency is greatly improved. Variable speed control not only can change the speed from high to low, but also from low to high speed, and the shifting slope of the shifting speed and the starting angle of the shifting can be easily set digitally on the power supply.

Smart counting & leak proof & foolproof

Selectable countdown and countdown smart counting methods

● With the use of external sensors and tools, the leak-proof function can be realized. When the sensor detects that the product is in place, the power supply gives a signal to enable the tool to lock the product until all the screws are set to give a signal and unlock the tool to achieve the anti-leak lock function.

● In the absence of a lock, the external sensor can also be used to detect the state of the product being tightened, and the lock can be locked by locking the electric batch.

● Practical rework mode. When the operator finds that the screw with the last function needs to be exited for some reason, the count value will be automatically reduced by one when the rework mode is activated to ensure that the count is not disordered.

Automaton connection / external control and output IO

When we need to tighten with the automaton, the power supply is connected to two ways.

● 485 industrial interface. Through the standard 485 industrial communication interface, external devices can be used to control the speed, angle, speed change and so on. We will open the complete protocol and related DEM0 code, so that users can quickly and easily connect the PLC and the electric batch quickly. Through the 485 interface, parameters can be set, and the current speed, angle and other parameters can be read to the host computer for analysis and display.

● Standard PLCIO optical isolation interface. In the absence of a 485 interface environment, it is also possible to connect via standard PLCIO opto-isolated IO. The product provides 3 sets of inputs, and 3 sets of IOs are processed, all of which are DC24V optical isolation. The three sets of inputs are used to control the forward and reverse rotations, and the three sets of outputs are 0K, NO, and the counts complete the three signals. By simple combination, external IO can be used for external control to realize the function of automatic lock.

other functions

Password protection:

By setting the administrator password, you can avoid changing the parameter settings by the left and right.

Slow start:

In self-tapping screws, the electric batch is usually rotated a few times at a slow speed, so that the screw mouth can be quickly tightened after eating the locked parts.

Statistical analysis:

According to the tightening state of each screw, the total number is counted, the number of successes and failures is tightened, and the pass rate is counted to make the operator

* Product name:
* Contact：	Your name
* Phone	Your phone
* Message:
Captcha：